SEAFLO beer pump is made of food grade materials, very safe and reliable. Good heat dissipation, high temperature resistance, flame retardant materials. It can draw cold water and hot water. The life span is 15000 hours. High efficiency, the maximum flow rate is up to 32 LPM / 7.6GPM. The lift can reach 4M / 18FT. The Stainless Steel Inline Pump 115V/230V is a homebrew beer pump, which is typically used to transfer hot and/or cold liquids between brewing vessels.This pump is designed for home brewing only. Not intended for any other pumping use or application. The pump is NOT Self Priming! Do Not Run Dry. The pump head must be flooded with liquid prior to turning on the pump.The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.Always disconnect power before performing work on or near the pump motor.
The life span is 15000 hours. High efficiency, the maximum flow rate is up to 29.5 LPM / 7.5GPM. The lift can reach 4M / 18FT. The Stainless Steel Center Inlet Pump 115V is a homebrew beer pump,?which is typically used to transfer hot and/or cold liquids between brewing vessels.This pump is designed for home brewing only. Not intended for any other pumping use or application. The pump is NOT Self Priming! Do Not Run Dry. The pump head must be flooded with liquid prior to turning on the pump.The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.Always disconnect power before performing work on or near the pump motor.
SEAFLO beer pump is made of food grade materials, very safe and reliable. Good heat dissipation, high temperature resistance, flame retardant materials. It can draw cold water and hot water. The life span is 15000 hours. High efficiency, the maximum flow rate is up to 32 LPM / 7.6GPM. The lift can reach 4M / 18FT. The 115V/230V?Beer Pump inline with plastic pump head is a homebrew beer pump, which is typically used to transfer hot and/or cold liquids between brewing vessels.This pump is designed for home brewing only. Not intended for any other pumping use or application. The pump is NOT Self Priming! Do Not Run Dry. The pump head must be flooded with liquid prior to turning on the pump.The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.Always disconnect power before performing work on or near the pump motor.
SEAFLO beer pump is made of food grade materials, very safe and reliable. Good heat dissipation, high temperature resistance, flame retardant materials. It can draw cold water and hot water. The life span is 15000 hours. High efficiency, the maximum flow rate is up to 29.5 LPM / 7.5GPM. The lift can reach 4M / 18FT. The 115V/230V Inlet Pump with plastic pump head is a homebrew beer pump, which is typically used to transfer hot and/or cold liquids between brewing vessels.This pump is designed for home brewing only. Not intended for any other pumping use or application. The pump is NOT Self Priming! Do Not Run Dry. The pump head must be flooded with liquid prior to turning on the pump.The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.Always disconnect power before performing work on or near the pump motor.
The SEAFLO Magnetic Circulation pump is a centrifugal magnetic drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The pump is able to be run fully submerged or in open air for complete moisture protection. It also can pump liquids with a specific gravity greater than water, have a higher viscosity.
The SEAFLO Magnetic Circulation Pump is a centrifugal magnetic drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The pump is able to be run fully submerged or in open air for complete moisture protection. It also can pump liquids with a specific gravity greater than water, have a higher viscosity.
中文